Liebert Minivalidation 6000MVRT4UXLN Rack UPS

  • Mapped Fields:

    Inlet Pole: Index, Current, & Voltage. Outlet: Active Power, Apparent Power, & Power Factor. Outlet Pole: Index, Current, & Voltage. UPS Output: Source & Load Percentage. UPS Output Pole: Index. Battery: Status, Capacity Percentage, Runtime Remaining, Current, Voltage, & Seconds On.

  • Traps: Yes
  • Created by: Gary Elango
  • Trap mappings:

    One or more batteries have been determined to require replacement,One or more batteries have no longer been determined to require replacement,The Bypass is out of tolerance,The Bypass is no longer out of tolerance,The output of the UPS is in the off state,The output of the UPS is in the on state,A general fault in the UPS has been detected,A general fault in the UPS has no longer been detected,The result of the last diagnostic test indicates a failure,The result of the last diagnostic test no longer indicates a failure,The UPS is drawing power from the batteries,The UPS is no longer drawing power from the batteries,A test is in progress,The remaining battery run-time is low,The remaining battery run-time is no longer low,A temperature is out of tolerance,A temperature is no longer out of tolerance,An input condition is out of tolerance,An input condition is no longer out of tolerance,An output condition (other than OutputOverload) is out of tolerance,An output condition is no longer out of tolerance,The output load exceeds the UPS output capacity,The output load no longer exceeds the UPS output capacity,The Bypass is presently engaged on the UPS,The Bypass is no longer engaged on the UPS

  • Trap clearing: Yes
  • Plugin Type: structured
  • Classification: SNMP
  • Tested PowerIQ Version: 9.x
  • Certified: Yes
  • Certified By: Gary Elango
  • Date Created: Monday, 08 April 2024
  • License: 1

Download attachments:

Read 397 times